¶ Reprringer
The Reprringer is a primarily 3d printed .22CB pepperbox pistol. It is one of the earliest 3d printed designs and is long since obsolete.
| Reprringer | |
|---|---|
 |
|
| Type | Pistol |
| Caliber | .22CB |
| Origin | franco |
| Release Date | 2013 |
| Link | 1 ^(3.0 'hexen')^ |
The Reprringer is a pepperbox pistol design perhaps best noted for being rather small and firing a very weak cartridge instead of being overbuilt. At the time it was noted as being an innovative evolution in the world of 3d printed firearms but in retrospect it was largely a novelty.
The reprringer is a poor weapon and should not be printed. A similar weapon, but far better as it came after nearly a decade of 3d printing refinement, is the primarily printed Harlot.
¶ History
The reprringer went through several revisions, many mentioning being untested with live rounds, before it came to its current pepperbox configuration. Here are some of the known versions (the full history is lost to time):
- v2.0 Break-open single shot derringer
- v2.2 Hammer modified, barrel size increased to potentially handle 22s/lr
- v3.0 Pepperbox barrels added, metal inserts for barrels added
¶ Build Notes
This weapon does not comply with US law requirements for metal content or barrel rifling. If built it would likely be an AOW and would need metal inserts to remain legal.
¶ Derivatives
- Pentagun (5 barrels, larger metal inserts)
¶ Links
[1]FOSSCAD
Model Viewer